Company profile
Cognex Corporation: History, Products, Financials and Our Read
Cognex Corporation explained: history since 1981, the product lines, revenue by year, the RealSense deal and our read for a ten-year commitment.
Cognex Corporation is a Natick, Massachusetts company that makes industrial machine vision: cameras, software and barcode readers that let a production line see, inspect and identify what it is making. It is listed on NASDAQ as CGNX, it reports one business segment, and it describes itself, in its annual report, as a global technology leader in industrial machine vision systems.

This page is an independent profile for engineers and buyers who have to decide what a vendor commitment means. It covers the company’s history, structure and scale from its public filings, a paragraph on each product line with a link to the page that goes deep, where Cognex sits among its competitors, and our read, which is marked as our analysis. The platform itself, product by product, is covered at the Cognex technology hub. Think of this page as the company and that one as the technology.
How we sourced this. Numbers, dates, ownership and deal terms come from SEC filings, Cognex releases and Cognex’s own product documentation, and each carries its fiscal period. What Cognex says about itself is attributed (“Cognex states”). Where we could not confirm something from a primary source, we leave it out or say so. Joltek has no commercial relationship with Cognex, and nothing here comes from any client or customer engagement.
What Cognex is, in two sentences
Cognex builds machine vision systems and barcode readers that inspect, guide and identify parts in factories, warehouses and laboratories, and sells them mainly to makers of consumer electronics, vehicles, packaged goods and logistics equipment. It is a US public company with about 2,700 employees, no debt, and a product range that runs from a small camera with a built-in spreadsheet to AI software trained in the cloud.
Cognex history: from 1981 to the RealSense deal
The company states in its fiscal 2025 annual report that it was founded in 1981. The annual report notes that it bought and renovated its Natick headquarters building in 1994. The turns that matter to a buyer today are these.
2005. Cognex acquired DVT Corporation, a maker of vision sensors, for about $115 million, according to trade press at the time. The DVT trademark still appears in Cognex’s list of marks, which is how that purchase is visible in the product documentation today.
2011. Robert Willett became chief executive in March 2011. Robert J. Shillman, who had led the company until then, stayed on as Chairman and Chief Culture Officer. The 2026 proxy statement notes that the CEO and Chair roles have been separate since that month.
2015 and 2016. Cognex sold its Surface Inspection Systems Division for $156 million in cash, closing on 6 July 2015. The buyer was AMETEK, according to trade press. Willett said at the time that the division did not fit Cognex’s long-term objectives and that the company could focus on discrete manufacturing. In the same period Cognex bought a handful of small companies: Manatee Works (mobile barcode scanning, 2015), and AQSense, EnShape, Chiaro Technologies and Webscan in 2016, each paid for with $1 million to $6 million of cash at closing. They added 3D vision and barcode verification, and the acquisitions page has the table.
2017 and 2019. Two purchases made Cognex a deep-learning company. It bought ViDi Systems of Switzerland on 4 April 2017 for $23.0 million, and SUALAB of South Korea on 16 October 2019 for $195 million in total. Cognex’s 2019 annual report says that, combined with ViDi’s intellectual property, it believed Cognex was a leading provider of deep learning-based industrial vision software.
2021. Anthony Sun became Board Chair in May 2021. He has been a director since 1982. The leadership page covers the board, the executive team and the succession history.
2023. Cognex announced on 29 August and closed on 18 October the acquisition of Moritex Corporation of Japan, a maker of lenses and lighting, from Trustar Capital. The enterprise value was ¥40 billion, about $270 million, and total consideration was $296.1 million, per the announcement. Cognex calls it its largest acquisition to date and says the purpose was to replace third-party optical components with parts it manufactures itself.
2025. Matt Moschner was promoted to President and Chief Operating Officer on 20 February and became President and CEO on 27 June, when Willett retired as CEO. In the same year Cognex launched OneVision, a cloud platform for building and managing AI vision applications, and SLX, its first line of devices for logistics.
2026. In February Cognex said it had finished a strategic portfolio review and would exit about $22 million of non-core, no-growth or low-margin revenue. On 1 April it sold the Japan-focused trading business it had acquired with Moritex, for about $11.9 million. On 22 September it announced an agreement to buy RealSense, Inc. for about $500 million in cash. As of 20 November 2026 that deal has not closed. Cognex expects closing in the fourth quarter of 2026.

How Cognex is structured today
Cognex reports one segment, machine vision, and the chief executive is its chief operating decision maker. There is no separate division with its own financials to analyse. It groups its products into families, which is the structure we follow for the technology pages:
| Family (Cognex’s grouping) | What it covers |
|---|---|
| Vision systems and sensors | In-Sight 2D and 3D systems and sensors, using rule-based tools, deep learning and “edge learning” |
| OneVision | Cloud platform for training and managing AI vision applications, launched 2025 |
| Vision software | VisionPro, a tool library for PC-based vision with third-party cameras |
| Barcode readers | DataMan fixed-mount and handheld readers and verifiers |
| Vision accessories | Cameras, lenses, lighting, controllers, frame grabbers and I/O cards; optics came with Moritex |
| SLX | Devices for logistics, first launched in 2025 |
How it sells. Cognex states a direct sales model with sales teams aligned to three approaches: market creation and expansion, market penetration, and partner enablement, where the last team works with machine builders, system integrators and automation solution providers. The earlier annual report also describes a global network of distribution and integration partners that sell primarily to smaller customers. Cognex splits revenue into “standard products and services” and “application-specific customer solutions”, and says services such as support, consulting and training are under 10 percent of revenue.
How it builds. Contract manufacturers in Indonesia and Malaysia build most of the hardware, and Cognex finishes software loading and quality control in its own distribution centres in Cork, Ireland, Southborough, Massachusetts and Singapore. Moritex added optical component plants in Shenzhen, China and Bac Ninh, Vietnam. A June 2022 fire at the Indonesian contract manufacturer destroyed Cognex inventory, which is a useful reminder of how concentrated hardware supply can be.
Cognex revenue and scale
The figures below are from Cognex’s annual report and quarterly filings. Cognex’s fiscal year is the calendar year.
| Measure | Figure | Period | Source form |
|---|---|---|---|
| Revenue | $837.5 million | Fiscal 2023 | 10-K |
| Revenue | $914.5 million | Fiscal 2024 | 10-K |
| Revenue | $994.4 million, up 9% | Fiscal 2025 | 10-K |
| Gross margin (our calculation) | 66.9%, after a $13 million inventory charge | Fiscal 2025 | 10-K |
| Operating income | $162.6 million, 16.3% of revenue | Fiscal 2025 | 10-K |
| Revenue | $873.1 million, against $742.0 million | Nine months to 4 October 2026 | 10-Q |
| Operating margin (our calculation) | 28.2% | Nine months to 4 October 2026 | 10-Q |
| Revenue guidance | $1,143 million to $1,163 million | Fiscal 2026, as of 4 November 2026 | 8-K |
| Cash and investments, no debt | About $846 million | 4 October 2026 | 10-Q |
| Employees | 2,745 | 31 December 2025 | 10-K |
Revenue fell to $837.5 million in fiscal 2023 from $1,006.1 million in fiscal 2022 and has been rebuilding since, which is the shape the next diagram shows. That pattern is typical of a vendor tied to manufacturing capital spending.
Where the revenue comes from. Cognex states that logistics, packaging, consumer electronics and automotive together made up about 85 percent of 2025 revenue. Its 2024 annual report gave individual shares for that year: logistics about 23 percent, automotive about 22 percent, consumer electronics about 17 percent and semiconductor about 11 percent. The two years group the markets differently, so the jump in the combined figure is mostly regrouping, not a trend. By region, customers in the Americas were 41 percent of fiscal 2025 revenue, Europe 25 percent, Greater China 16 percent and other Asia 18 percent.
Customer concentration. One customer accounted for 15 percent of fiscal 2025 revenue, up from 10 percent in 2024, and Cognex’s filing does not name it. Older filings did name Apple Inc., at 20 percent of 2017 revenue and 15 percent of 2018 revenue. We draw no conclusion about who the 2025 customer is. The point for a reader is the risk factor Cognex itself lists: loss of, or reduced purchases by, large customers in logistics, consumer electronics or automotive.
Capital. Cognex returned $206 million to shareholders in 2025, $151.2 million in buybacks and $54.6 million in dividends. It funded the pending RealSense purchase by selling about $330 million of investments in late Q3 2026. The financials page reads these numbers in full.
The Cognex product lines
Each paragraph below summarises one line and links to the page that covers it properly. Product lineups are as of November 2026, and Cognex’s current documentation is the authority for what is on sale.
In-Sight smart cameras. The In-Sight line is Cognex’s best-known product: a camera with a processor and inspection tools in one body, configured by an engineer and wired to a PLC. Cognex launched the In-Sight 3800 in April 2023, the In-Sight 8900 in 2025, and the In-Sight 6900 vision controller and In-Sight 3900 in April and May 2026. Cognex states the 3900 is “up to 4X faster”. Newer families are set up in In-Sight Vision Suite, while In-Sight Explorer’s last release we found is version 6.5.1 from October 2024. Cognex has not said, in anything we could read, that one replaces the other. If you are choosing between current cameras, start with choosing an In-Sight camera.
Deep learning and AI. Cognex’s deep learning and AI tools trace to the ViDi and SUALAB purchases. They come in three tiers that are different products: pre-trained “edge learning” that now carries the name Edge AI on the camera, VisionPro Deep Learning on a GPU-equipped PC, and the OneVision cloud platform, which Cognex made generally available on 13 May 2026. Every performance claim about them is Cognex’s, not an independent benchmark.
VisionPro. VisionPro is the PC-based option: a library of vision tools, including pattern-matching tools such as PatMax, that runs on a computer with cameras from several suppliers. It trades the simplicity of a smart camera for flexibility with multiple cameras and custom logic.
DataMan barcode readers. The DataMan line covers fixed-mount and handheld readers and barcode verifiers that read one-dimensional, two-dimensional, label and direct part mark codes. Cognex launched the AI-assisted DM290 and DM390 in January 2025. In logistics, it introduced the SLX portfolio on 28 October 2025.
3D vision. Cognex’s 3D vision products include the laser-profiling In-Sight 3D-L4000, launched in January 2021, the In-Sight L38 of April 2024, and PC-based 3D sensors for volume and dimensioning work. We found no newer 3D family than the L38.
PLC integration. None of these devices does anything for a line until it speaks to a controller, and PLC integration is where plant projects succeed or stall. The protocols supported depend on the exact model, not the family name, so check the current manual. The page we expect most readers to want first is EtherNet/IP and Studio 5000, the common case on Rockwell Automation lines (see our Rockwell Automation pages).
Lifecycle and security. Older In-Sight systems raise a question every maintenance team eventually asks, and lifecycle and security answers it as far as public sources allow. In September 2025 CISA published advisory ICSA-25-261-06 covering nine vulnerabilities in In-Sight systems based on In-Sight Explorer, which Cognex describes as legacy products not intended for new applications. We found no public lifecycle notice for any In-Sight family. Detail is on the 2025 advisory page.
Applications. The applications pages cover food and beverage, pharmaceutical and packaging inspection, which are the settings where most of our readers meet this equipment.
Where Cognex sits in the market
Machine vision is a crowded field with several architectures: simple vision sensors, smart cameras, PC-based systems and AI-focused platforms. Analysts’ estimates of the market’s size and of vendor shares disagree, depending on whether they count components, systems or software and on how they define revenue, so we publish no figure. The table below compares named competitors on the same dimensions. It does not rank them.
| Competitor | Type of company | Where it meets Cognex | What differs |
|---|---|---|---|
| Keyence | Japanese company | Vision systems, smart cameras and code readers in discrete and packaging plants | Sells directly with applications engineers, usually as a single-vendor stack |
| SICK | Private, family-controlled | Code reading, vision sensors, logistics scanning and dimensioning | A sensor and safety company first; vision is one part of a wide catalogue |
| Zebra Technologies | Public company | Fixed industrial scanners, smart cameras and PC-based libraries after buying Matrox Imaging in 2022 | Strong in warehouse and logistics hardware, with a software-centred vision stack |
| Datalogic | Listed in Milan; majority holder launched a tender offer aimed at delisting in May 2026 | Code reading and vision sensors in retail, logistics and packaging | Barcode share of its business is larger than vision; check its current listing status |
| Omron | Public company | Code readers (Microscan, announced 2017) and PC-based inspection | Vision as part of a broad portfolio of PLCs, motion, safety and robots |
| Teledyne | US company | Smart cameras, PC-based software and camera components | Also supplies cameras to integrators who build rival systems |
| Siemens | Public company | Code readers and AI inspection (Inspekto, bought 2024) | Tight integration with Siemens controllers; specialist breadth sits elsewhere |
| MVTec | Private | Software only: HALCON and MERLIC compete with VisionPro | The buyer selects cameras, lighting and computers separately |
AI-focused vendors such as Landing AI, Elementary and Instrumental sell around trained models, and their pitch is faster set-up from fewer images. Funding news is not product evidence, and the questions to ask are the same as for any vendor: how a model is validated, versioned and locked, what happens at changeover, and what the exit path is. The competitors page gives each vendor a fuller comparison.
How we read the table. In our view these vendors are not offering the same thing. A vendor that sells camera, lighting, controller and software as one package makes a different offer than a software library that runs on any camera, and a sensor maker adding vision makes a third. Cognex spans several of these architectures and several routes to buy, which is its breadth and, for a buyer, a reason to be clear about which product line you are actually choosing.
What Cognex says it is doing: strategy
Cognex states three objectives in its fiscal 2025 annual report: to be the leading provider of AI technology for industrial machine vision, to deliver the best customer experience, and to “double our customer base within five years”. Its method is a “salesforce transformation”, which it describes as replacing the 2023 and 2024 emerging-customer initiative, which added headcount through a stand-alone sales organisation, with process, data analytics and closer work with integrators and machine builders. It calls acquisitions a complement to organic growth and says they may be larger than Moritex. RealSense, which Cognex describes as an entry into robotic perception, fits that description. The strategy page separates what Cognex states from what we read into it.
It also runs a cost reset. In February 2026 Cognex said it expected a further $35 million to $40 million of annualised cost reductions by the end of 2026 and set a target of a 25 percent adjusted EBITDA margin on a run-rate basis by the end of the year. Headcount fell from 2,992 at the end of 2023 to 2,745 at the end of 2025. In November 2026 Cognex guided to a 31 to 32 percent adjusted EBITDA margin for the full year, so it has run ahead of that target.
Our read: what we would tell a client weighing a ten-year commitment
This section is our analysis. It rests on the facts above and it is our opinion, not Cognex’s and not a forecast. It is written for a plant or engineering leader asking whether to standardise on Cognex.
In our view the company itself is not the main risk. Cognex has no debt, about $846 million in cash and investments before the RealSense payment, a product range with decades of installed use, and an operating margin that has risen sharply in 2026. We read that as a vendor that will still be selling and supporting vision in ten years. The risks that matter to a plant are more specific.
1. Cognex’s revenue is cyclical, and that shapes product decisions. Revenue fell about 17 percent in 2023 and the company then cut headcount, took a $13 million inventory charge and began exiting low-margin lines. We read that as a vendor that will prune its catalogue when demand softens. A plant should assume that any product can be retired and ask for lifecycle commitments in writing.
2. The sales motion follows large customers. With one customer at 15 percent of revenue and logistics, consumer electronics and automotive heading the list, we think a food, beverage or pharmaceutical plant is not the customer Cognex’s strategy is built around. That is not a warning. It is a reason to confirm, before you commit, that the product line and support model you rely on suit smaller industrial accounts, and to engage an integrator who knows it.
3. Older systems need a plan, and the plan should not depend on Cognex. CISA’s 2025 advisory on In-Sight 2000, 7000, 8000 and 9000 systems lists nine vulnerabilities in products that Cognex calls legacy and not intended for new applications. The 7000, 8000 and 9000 are older and mature, and we found no end-of-life notice. In our view the practical response is segmentation, access control and a replacement budget, which we cover in the lifecycle pages and in our ISA/IEC 62443 guide.
4. RealSense is a larger bet than past deals. A $500 million cash purchase is nearly twice Moritex. We would not expect it to change what a plant buys for packaging inspection in the next two years, and we would watch two things: whether the deal closes, and whether integration pulls engineering attention from the products you use.
5. The decision that protects you is the interface, not the brand. Keep the PLC handshake, image storage and configuration backups documented and vendor-neutral, so that replacing a camera is a project and not a rebuild. This is the same advice we give for control system modernization. A good owner’s engineer can write that specification, and a technical due diligence review can test it.
What would change our view. A published lifecycle policy for In-Sight and DataMan, a credible record on supporting older products, or a sharp fall in cash or margin. We will update this page when the RealSense deal closes.
Where Joltek works with Cognex products
Our team has programmed in-line inspection on Cognex In-Sight cameras at large food and consumer-goods manufacturers, and we integrate Cognex cameras and readers with PLCs, line controls and data systems as part of controls projects: specification, PLC handshakes, commissioning and troubleshooting. We have no commercial relationship with Cognex and do not resell its products.
That is the whole of it. We do not certify, train or sell Cognex equipment, and we are not an authorised integrator of the vendor. Where we help is the part between the camera and the plant: choosing, specifying, wiring, commissioning and keeping it running. If that is useful to you, see our systems integration and commissioning support services or contact us.
Trademark notice
All product names, logos and brands are the property of their respective owners. Use of these names does not imply any affiliation with, endorsement by, or partnership with the manufacturer. Joltek is an independent consultancy; commercial relationships, where they exist, are disclosed on our Partners page.
Frequently asked questions
What does Cognex Corporation do?
Cognex Corporation, based in Natick, Massachusetts, makes machine vision systems: cameras and software that inspect, guide and identify parts on a production line, plus barcode readers. Cognex reports a single segment and groups its products as vision systems and sensors (In-Sight), vision software (VisionPro), barcode readers (DataMan) and vision accessories such as lenses and lighting.
How much revenue does Cognex have?
Cognex reported revenue of $994.4 million in fiscal 2025, up 9 percent from $914.5 million in fiscal 2024. For the nine months ended 4 October 2026 it reported $873.1 million, against $742.0 million a year earlier. As of November 2026, Cognex guides to full-year 2026 revenue of $1,143 million to $1,163 million.
Who is the CEO of Cognex?
Matt Moschner has been President and CEO since 27 June 2025. He succeeded Robert Willett, who had been CEO since March 2011. Moschner was President and Chief Operating Officer from 20 February 2025. Anthony Sun has been Chair of the Board since May 2021. This is as of November 2026, and our leadership page has the detail.
Is Cognex buying RealSense?
Cognex announced on 22 September 2026 that it agreed to acquire RealSense, Inc., a maker of depth cameras for robotics, for about $500 million in cash. Cognex expects to close in the fourth quarter of 2026. As of 20 November 2026 we found no closing announcement, so we report it as announced, not completed.
Who are Cognex's main competitors?
Cognex competes with Keyence, SICK, Zebra Technologies (which owns Matrox Imaging), Datalogic, Omron, Teledyne, Siemens and software specialists such as MVTec, plus newer AI-focused vendors. Which one is the closest rival depends on the application: code reading, smart cameras, PC-based vision or AI inspection. Analysts' market-share estimates differ widely, so we publish none.
Does Joltek work with Cognex?
Joltek has no commercial relationship with Cognex and does not resell its products. Our team has programmed in-line inspection on Cognex In-Sight cameras and integrates Cognex cameras and readers with PLCs, line controls and data systems as part of controls projects. This site describes Cognex independently, from public filings and Cognex documentation.
References and further reading
- Cognex Corporation Annual Report on Form 10-K for fiscal 2025 · Cognex Corporation (filed with the SEC, 12 February 2026)Business description, segment, end markets, customers, headcount, strategy and the financial statements.
- Cognex Corporation Definitive Proxy Statement (DEF 14A), 13 March 2026 · Cognex Corporation (SEC)Board, executive officers, major holders and the 2025 CEO succession.
- Cognex Reports Third Quarter 2026 Results (8-K Exhibit 99.1) · Cognex Corporation (SEC)Q3 2026 revenue, margins, cash, and the raised 2026 guidance.
- Cognex to Acquire RealSense (8-K Exhibit 99.1) · Cognex Corporation (SEC)The terms Cognex announced on 22 September 2026 and its stated rationale.
- Cognex to Acquire Moritex (8-K Exhibit 99.1), 29 August 2023 · Cognex Corporation (SEC)The largest completed acquisition and Cognex's rationale for owning optics.
- Cognex Reports Fourth Quarter and Full Year 2025 Results · Cognex CorporationThe portfolio review, the exit of low-margin revenue and the 2026 margin target.
- ICSA-25-261-06: Cognex In-Sight 2000, 7000, 8000, 9000 series · CISAThe September 2025 advisory on older In-Sight systems.
- Legal notices and trademarks, Cognex product documentation · Cognex CorporationCognex's own list of its registered and unregistered marks.