Book a consultation

Cognex In-Sight Smart Cameras: Families, Selection and Failure Modes

In-Sight 3800 vs 3900 vs 8900: Choosing a Cognex In-Sight Camera

In-Sight 3800 vs 3900 vs 8900 vs 2800: a decision tree on resolution, speed, AI and form factor, and the facts Cognex has not published.

Vladimir Romanov


Which In-Sight should you choose: the 3800, the 3900 or the 8900? For most inspections the answer is set by three things: how many pixels the smallest feature needs, how much space and ingress protection the station allows, and whether you are willing to specify a part whose prices, ship dates and model numbers Cognex has not yet published. This page sets the In-Sight 3800 vs 3900 decision beside the 8900, 2800, 6900 and SnAPP on the same dimensions, with a decision tree. It sits under the In-Sight overview and the Cognex hub.

Short answer, as of November 2026. The 3800 is the documented, mature choice for 1.6 to 16 megapixel work. The 3900 is the choice when you need up to 25 megapixels or the speed Cognex claims, and you can accept that its detail is still emerging. The 8900 fits small spaces and machine-builder stations up to 12 megapixels. The 2800 covers modest-resolution checks. The 6900 is for several cameras on one controller.

The cameras on the same dimensions

Cognex figures are as published in its manuals and releases. “Cognex states” marks a performance claim.

Dimension3800390089002800
Launched10 April 20235 May 2026About March 2025 (trade press)April 2022
Resolution1.6 to 16 MPUp to 25 MP (Cognex states)0.5 to 12 MP0.4 to 2 MP
Frame rate (mono, full resolution)125 fps at 1.6 MP, 18 fps at 16 MPNot stated142 fps at 0.5 MP, 21 fps at 12 MPUp to 45 Hz
ShutterGlobalNot statedGlobalNot stated
AI toolsEdge AI on the camera, rule-basedEdge AI, Advanced AI, rule-basedEdge Learning, rule-basedEdge learning classify
NetworkTwo Ethernet ports, one TSN-capableDual EthernetNot read in detailNot read in detail
SoftwareVision SuiteVision SuiteVision SuiteVision Suite
Status (ours)CurrentCurrentCurrentCurrent
Not publishedWarranty termsPrices, ship dates, models, software minimum; ingress rating only via trade press (IP67, quoting a Cognex product leader)None foundPer-model Edge AI list

What the table does not say. Cognex states the 3900 is “up to 4X faster than previous-generation Cognex vision systems” and does not name the reference system. For the 3800, Cognex’s 2023 release claimed twice the processing speed of previous systems, and a customer quoted there expected 30 percent faster performance than an In-Sight 7900 and measured 50 percent faster in its own application. Those are vendor and customer statements about specific cases. They are not a benchmark for your job.

A decision tree

Decision tree for choosing an In-Sight camera A decision tree with three questions. First: does the station need several cameras served by one unit? If yes, consider the In-Sight 6900 controller. If no, second question: is a simple pass or fail presence check enough, set up from a browser? If yes, consider the In-Sight SnAPP. If no, the third question is the resolution the smallest feature needs. Up to 2 megapixels points to the 2800. Up to 12 megapixels in a small space or on a machine points to the 8900. Up to 16 megapixels with the most published documentation points to the 3800. Between 16 and 25 megapixels, or when the claimed speed matters, points to the 3900 once Cognex publishes its details. A note says to confirm the ingress rating and the AI tools for the chosen model. From requirement to camera family 1 · Several cameras on one unit? Separate cameras, lenses and lights yes In-Sight 6900 controller Resolution set by the camera chosen no 2 · Is a simple presence check enough? Browser set-up, no PC software yes In-Sight SnAPP 1.6 MP, edge learning, pass or fail no 3 · What resolution does the smallest feature need? Field of view divided by pixels across it, with several pixels on the feature Up to 2 MP In-Sight 2800 Modest-detail checks, entry price point Up to 12 MP, small In-Sight 8900 Tight space, machine builder stations Up to 16 MP In-Sight 3800 Most published detail, in Vision Suite since 2023 Up to 25 MP or speed In-Sight 3900 Details still emerging, confirm with Cognex Whichever branch you reach, confirm the ingress rating, the AI tools and the software version for the exact model. The tree is our simplification: lens, light, fixture and speed can override resolution.
Resolution splits the cameras, but the first two questions are about architecture: several cameras need a controller, and a simple presence check may need no PC software at all.

How to work out the resolution

Start from the smallest feature you must see and the field of view that holds the part. Divide the field of view by the number of pixels across it to get millimetres per pixel, then check that several pixels fall across the feature.

An illustrative calculation. A label check must find a 0.25 millimetre print defect across a 200 millimetre field of view. With three pixels across the defect, each pixel can cover about 0.083 millimetres, so the camera needs about 2,400 pixels across the field. That is the 5 megapixel class (the IS3805 is 2,448 pixels wide), not the 2800. Sources disagree on the pixels-per-feature rule, with two as the theoretical minimum and three to five as common margin, so this is design practice, not a Cognex specification.

A single clear glass lens resting on a pale blue surface
Resolution is only as good as the glass in front of it: a high-resolution sensor on a poor lens delivers fewer usable pixels than the sensor table suggests.

Resolution costs speed and glass. On the 3800, monochrome frame rate falls from 125 per second at 1.6 megapixels to 18 at 16. The 8900 falls from 142 to 21 between 0.5 and 12 megapixels. Cognex lists separate high-resolution liquid and fixed lens ranges for the 8 to 16 megapixel 3800 models, so budget for the lens as well as the body.

When each one is the better pick

Pick the 3800 when the schedule matters. It has been in Vision Suite since release 23.1.0, has a full reference manual with field-of-view tables for every model, and its Edge AI tools have run on the camera itself, without an external graphics accelerator, since release 24.3.0. A project that must commission in months wants parts with published behaviour. Its two Ethernet ports, one of them TSN-capable, and its Multi Torch light and liquid-lens autofocus suit a station that needs a combined camera, light and lens from one source.

Pick the 3900 when the inspection needs what only it claims. That means more than 16 megapixels, or throughput that a 3800 cannot reach, and you can obtain written specifications, pricing and delivery from Cognex before the design is frozen. In our view a purchase specification should name a minimum performance and require a demonstration on your parts, not rely on “up to 4X faster”.

Pick the 8900 when space and integration dominate. Cognex and trade press describe it as a small-form-factor system for machine builders. If the station sits inside a guarded machine and the resolution is 12 megapixels or less, its size is the reason to choose it. Its manual states IP40 with cables and lens attached, so confirm the rating suits the station.

Pick the 2800 when the job is simple. Presence, a clear code or a classification at modest resolution can be done on a camera limited to 2 megapixels. It leaves little headroom, so buy it only if the feature size and field of view leave margin.

Consider the 6900 or SnAPP when the shape differs. The 6900 is a controller for several cameras, and SnAPP is a browser-configured sensor for simple checks. Neither is a cheaper 3800.

What to ask Cognex or the distributor before ordering

  1. The exact orderable part number, including lens, light and cover, since a camera body alone has no lens and the ingress rating of the 3800 depends on the cover or Multi Torch.
  2. The minimum Vision Suite version for that model, and the firmware it ships with.
  3. Which Edge AI or Advanced AI tools run on that model, and the tool pack or licence each needs.
  4. The ingress rating and operating temperature for the configuration you will install.
  5. Lead time and the family’s expected availability, in writing.
  6. Spares and replacement policy, including whether a replacement ships with firmware that can open your saved jobs.

Where it gets hard

  • The 3900 is documented by press release. Cognex’s release states 25 megapixels, the Qualcomm Dragonwing platform, dual Ethernet and Edge AI and Advanced AI tools. We found no model numbers, prices, ship dates or minimum Vision Suite version in Cognex’s release. Vision Systems Design quotes a Cognex product leader saying the 3900 is IP67-rated and that teams can use the In-Sight Vision Suite tools they already know; we have not seen either in a Cognex manual.
  • “4X faster” has no named baseline. Ask Cognex for a benchmark on your own job, and test with bad parts.
  • The 8900 is rated IP40. The 8900 manual gives IP40 with all cables and the lens properly attached, and trade press agrees. Do not specify it for washdown without Cognex’s written confirmation of a suitable enclosure.
  • Edge AI availability by model is not published as a matrix in the sources we read. Confirm that the tool you need runs on the exact model.
  • OneVision support differs by model. Cognex’s May 2026 general availability release says OneVision is “optimized to work with Cognex’s latest systems, including the In-Sight 3900 and In-Sight 6900”, while its June 2025 beta release named the 3800 and 8900. Whether the 3800 and 8900 remain supported was unclear to us.
  • Lifecycle. The 3800 is current, but a newer family now exists. Ask about availability and software support for the family you choose, and for how long.

Related: In-Sight overview · Vision Suite versus In-Sight Explorer · EasyBuilder versus Spreadsheet · Cognex hub

Frequently asked questions

Should I choose the In-Sight 3800 or the 3900?

Choose by what Cognex has published and what your inspection needs. The 3800 has documented models from 1.6 to 16 megapixels and has been in Vision Suite since release 23.1.0. The 3900 reaches 25 megapixels and Cognex states it is up to 4X faster than previous-generation systems, but as of November 2026 its releases give no prices, ship dates or model numbers.

What is the In-Sight 8900 best for?

Cognex describes the 8900 as a small form factor, global-shutter system from 0.5 to 12 megapixels with full In-Sight Vision Suite and Edge Learning support. Trade press positions it for OEMs in regulated industries. In our view it suits tight spaces and built-in machine stations. Its manual states IP40 with cables and lens attached, well below the IP67 the 3800 manual gives with its cover or Multi Torch fitted, so check the rating before specifying it anywhere wet.

Is the In-Sight 2800 still worth buying?

The 2800 is in Cognex's 2025 documentation, from 0.4 to 2 megapixels, and runs the edge learning classify tool on the camera. We label it current. It is a reasonable fit for modest-resolution checks such as presence, simple codes and classification, but a task that needs fine detail over a wide field needs more pixels than its 2 megapixel limit allows.

How many megapixels do I need?

Work backwards from the smallest feature. Divide the field of view by the pixels across it to get millimetres per pixel, and put several pixels across the feature. Sources disagree on how many: two is a theoretical minimum, and three to five is the usual design margin. This is general vision practice, not a Cognex rule. Higher resolution also lowers frame rate and needs better lenses.

When would I choose the In-Sight 6900 controller?

Choose a controller when one station needs several cameras, or when you want to choose cameras, lenses and lights separately. Cognex describes the 6900 as modular, with auto-discovered cameras, an NVIDIA Jetson module and up to 157 TOPS. It is not a replacement for the 3800 or 3900, which are single-body smart cameras, and its resolution depends on the camera attached.

References and further reading

  1. In-Sight 3800 Reference Manual (Vision Suite 25.3) · Cognex documentationSensor table, frame rates, field-of-view tables and ports.
  2. In-Sight 8900 Reference Manual · Cognex documentationSensor and frame-rate table, and the statement of full Vision Suite and Edge Learning support.
  3. In-Sight 2800 Reference Manual · Cognex documentation
  4. Cognex launches highest performance embedded AI vision system, In-Sight 3900 · Cognex release, 5 May 2026Source of the 25 MP and 4X faster claims.
  5. Cognex launches the In-Sight 3800 vision system for fast, accurate AI-based inspections · Cognex release, 10 April 2023
  6. Cognex launches In-Sight vision controller powered by NVIDIA (In-Sight 6900) · Cognex release, 28 April 2026
  7. Scalable, PC-Free AI Inspection with Cognex In-Sight 3900 · Vision Systems DesignIP67 and Vision Suite statements by a Cognex product leader.

← In-Sight

Have a project that needs technical ownership?

Send us the situation. If it is not something we should take on, we will say so.

The Plant-Side Brief

The weekly brief for the people who own a plant’s control systems.

One email every Wednesday for engineering and operations leaders responsible for controls, SCADA, MES and OT networks. Skim the top in two minutes; read the Deep Dive when you have fifteen.

  • One modernization problem, worked through to cost, risk and a schedule you can defend. The Deep Dive.
  • End-of-support dates before they reach your plant Windows, servers, controllers and HMI software. Lifecycle Watch.
  • A checklist your engineers can run that week not a framework to admire. Field Kit.
  • Every number sourced, no vendor agenda we are paid by plants, never by vendors.