Cognex DataMan Barcode Readers: Lineup, Protocols and Selection
Cognex Barcode Verifier: Reading vs Verifying and the ISO Grades
A Cognex barcode verifier grades print quality, a reader only decodes. ISO/IEC 15415, 15416 and 29158 grades, GS1, DSCSA and Sunrise 2027 context.
A Cognex barcode verifier answers a different question from a reader. A reader asks “can I decode this code?” and passes the data to the PLC. A verifier asks “how good is this print, measured against a standard?” and reports a grade from A to F with the parameters behind it. The distinction matters because a code that reads today can grade poorly and fail next month, and a verifier is the instrument that sees it coming.
This page explains the grades, the standards behind them, the Cognex verifier as Cognex documents it, and where GS1, DSCSA and Sunrise 2027 fit. It belongs to the DataMan page in the Cognex hub.
Reading is not verifying
A reader decodes. It takes whatever light and image it has and tries to produce the data. A skilled decoder can read a damaged code, which is useful on a line and misleading as a quality measure.
A verifier measures. Under a defined light, aperture and calibration it measures parameters of the symbol and combines them into a grade. A grade means something only against a named standard and its lighting. Cognex’s DM475 manual describes the scale as A to F, A best, with parameters including symbol contrast, modulation, fixed pattern damage and grid non-uniformity (DM475 manual).
The grades and the standards
| Standard | Grades | Cognex states (DM475 manual) |
|---|---|---|
| ISO/IEC 15416 | 1D linear barcodes | Used for 1D print quality |
| ISO/IEC 15415 | 2D symbols printed on labels | Used for 2D codes on labels |
| ISO/IEC TR 29158 (AIM DPM) | 2D direct part marks | Used for DPM, see DPM reading |
| ISO/IEC 15426-2 | The verifier itself | Specifies verifier requirements |
A “1D grade” is a grade under ISO/IEC 15416, a “2D label grade” is one under ISO/IEC 15415, and a DPM grade is one under TR 29158. Quoting “an A” without the standard is not meaningful. The ISO catalogue also states that ISO/IEC 29158 now has a second edition (2025) and that the 2024 edition of ISO/IEC 15415 notes it can be applied to direct part marks (ISO). We did not read the standards themselves, which are paywalled, so the parameter list above is Cognex’s description.
What GS1 adds
GS1 is the application layer. The ISO standards say how to measure print quality. GS1 rules say what grade and which symbology a given application needs. The DM475 manual lists GS1 (retail, transport and food service) among its application standards, alongside UID MIL-STD-130, UDI for FDA medical devices, HIBCC and ISO/IEC 15434. Check the current GS1 General Specifications for the minimum grade for your symbol and use. We did not read them for this page, so we state no minimum grade here.
The Cognex verifier as documented
Cognex announced the DataMan 475 Verifier on 15 April 2020 (Automation.com). From Cognex’s manual:
| Item | What the manual says |
|---|---|
| Purpose | Inline verifier; the manual lists up to 20 codes per second for 1D and 10 per second for 2D |
| Output | Exports to PLC, database or FTP as CSV, HTML, PDF and custom formats |
| Variants | Label (45-degree four-quadrant light), DPM and HD (30, 45 and 90 degrees) |
| Housing | IP65, per the manual’s product description (its specification table also lists IP67 for one configuration) |
| Lighting rule | ISO/IEC-compliant grading needs the label light DMV-475V-LBL-0200, DMV-475V-DPM-0100 or DMV-475V-HD; other lighting gives Standards-Based Grading only |
| Standards-Based Grading | A feature-key add-on that approximates ISO verification when mounting or lighting cannot follow the standard |
| Calibration | Cards for UPC/EAN, Data Matrix, a Cognex card, and GS1; the Cognex card is for calibration only, with no ISO/IEC 15426 conformance or ISO 17025 traceability |

Cognex bought Webscan, a barcode verification software company, on 9 December 2016 (Vision Systems). The WebUI manual refers to “code quality or TruCheck details” in verification reports sent by FTP or SFTP. The 475 manual is current in the December 2025 documentation set, and we found no end-of-life notice, but Cognex has not published a lifecycle statement we could reach.
DSCSA and GS1 Sunrise 2027 context
DSCSA. FDA’s exemptions page, current as of 26 August 2026, lists an exemption from certain section 582 requirements for small dispensers until 27 November 2027, and says small dispensers are judged as of 27 November 2026 against a threshold of 25 or fewer full-time pharmacists and pharmacy technicians; it urges them to keep working toward compliance (FDA exemptions). We did not verify the dates for manufacturer or distributor obligations. DSCSA is about traceability data, and we found nothing in our sources linking it to a barcode grade.
GS1 Sunrise 2027. GS1 US describes Sunrise 2027 as a global transition from 1D UPC barcodes to 2D barcodes. It advises retailers to install point-of-sale scanners that read 2D barcodes and capture the GTIN, advises brands to start by adding 2D codes to existing packaging and to update existing QR codes to GS1 Digital Link, and says it is not necessary to implement all the capabilities of 2D by 2027 (GS1 US). It is a retailer-driven initiative, not a legal requirement, which even a competitor’s explainer says plainly (Keyence). GS1 US’s page sets no retirement date for 1D codes.
What this means for a plant. In our view a plant that prints and checks pack codes should plan to read and verify 2D symbols and parse Digital Link URLs. We could not confirm which Cognex DataMan models read and parse GS1 Digital Link, so ask Cognex before specifying.
A verification routine that holds up (our view)
A verifier only helps if somebody acts on the grade. This is the routine we would set up:
- Name the standard and grade in the specification, per symbol type, from your trading partner or GS1 rules.
- Verify at the source, at the printer or marker, on a defined sample frequency, and after every ribbon, label stock or laser change.
- Calibrate on schedule with the correct card, and log it.
- Set an action limit above the failure limit, so a falling grade triggers maintenance before the customer’s scanner rejects the code.
- Store the reports with the batch record, in a format your quality system accepts.
- Read at the point of use with a normal reader, and compare its no-read rate to the grade trend.
Where it gets hard
Lighting and calibration. A verifier grade from the wrong light is an estimate, and calibration cards are consumables that need controlling.
Verifying where the problem starts. Verify at the printer or marker, then read at the point of use. Verification at the end of a line finds a failure after thousands of units were made.
Grade is not a read rate. A grade C code may read at 100 percent in your lab and fail in the field.
Different graders disagree. Two verifiers, or a verifier and a reader’s built-in quality metrics, can differ. Use one method and keep a reference sample.
Regulated lines. Pharma lines add validation to the instrument, its software and its reports, which is a project of its own.
Related pages
Back to the DataMan page and the Cognex hub. For shipping-dock scanning, see logistics scanning. For an assessment of your labelling and traceability chain, see plant systems assessment.
Frequently asked questions
What is the difference between a barcode reader and a verifier?
A reader decodes the code and passes the data on. A verifier measures how good the print is against a standard, under defined lighting and aperture, and reports a grade from A to F plus the individual parameters. A code can read every time today and still grade poorly, which is the early warning a verifier exists to give.
Which standards does the Cognex DataMan 475 Verifier grade to?
Cognex's manual names ISO/IEC 15416 for 1D codes, ISO/IEC 15415 for 2D codes printed on labels and ISO/IEC TR 29158, called AIM DPM, for 2D direct part marks. It also lists ISO/IEC 15426-2, which sets requirements for the verifier. ISO-compliant grades need specific lighting accessories; other lighting gives Standards-Based Grading only.
Is GS1 Sunrise 2027 a legal requirement?
No. GS1 US describes Sunrise 2027 as a global transition from 1D UPC barcodes to 2D barcodes, and says it is not necessary to implement all the capabilities of 2D by 2027. A competitor's explainer calls it a retailer-driven initiative, not a legal requirement. GS1 US's page sets no retirement date for 1D codes, so do not assume they are going away on any date.
Does DSCSA tell me which barcode grade to hit?
We found no source tying the US Drug Supply Chain Security Act to a specific print grade. DSCSA sets traceability requirements, and FDA's exemptions page, current as of 26 August 2026, lists an exemption for small dispensers until 27 November 2027. The grade you target comes from your trading partner, GS1 rules or your own quality specification.
References and further reading
- DataMan 475 Verifier Reference Manual · Cognex documentationStandards, grade scale, lighting rule, calibration cards and application standards.
- ISO/IEC 29158 · ISOThe catalogue entry for direct part mark quality, including its link to ISO/IEC 15415.
- Exemptions under the Drug Supply Chain Security Act · US FDA
- GS1 US Sunrise 2027 · GS1 USThe industry initiative for 2D codes at retail point of sale.
- GS1 Sunrise 2027 explained · KeyenceA competitor's explainer that states plainly that Sunrise is an industry target, not a law.
- ISO/IEC TR 29158 (AIM DPM) · Cognex documentation